Skip to main content
Guides & How-To

Drawing programme (CAD): 2D, 3D, licences and file formats

Put simply: a professional drawing programme is called CAD, which stands for Computer-Aided Design. It's used to create technical drawings in 2D and models in 3D, where the drawing is data with dimensions, layers and components — not just a picture. You choose based on what you're going to draw (plans, products or buildings), who will need to open the files afterwards, and how the licence is structured. The file format determines whether others can continue working with your drawings. In the construction industry, there's a shared exchange format called IFC.

Author: Agent360 editorial team
Published: 9 November 2026
Last updated: 9 October 2026
Reading time: 8 min read

If you've landed here looking for a "drawing programme", there are two categories. One is software for illustrations and graphics. The other, which this article covers, is CAD for technical drawings that production staff, an adviser or a tradesperson can build to.

What is CAD, and what does it do?

CAD programmes vary widely, but typical features are:

  • 2D drawings with dimensions, layers, symbols and title blocks.
  • 3D models of components and assemblies.
  • Drawings derived from the 3D model, so changes to the model flow through to the drawing.
  • Bills of materials that list the components a product comprises.
  • Libraries of standard parts, so you're not drawing everything from scratch.
  • Visualisation and review, where others can see and comment without being able to make changes.
  • Import and export of files, so drawings can be shared with customers, advisers and workshops.

When do you need CAD?

The time has come when:

  • You're drawing in a programme that wasn't made for it, and tracking changes is difficult
  • Bills of materials are written by hand, and errors aren't found until production
  • Customers or partners ask for drawings in a format you can't provide
  • The workshop is working from an old version of the drawing
  • Many hours are spent looking for the right version of a drawing

It's too early if drawing is only an occasional task, and the drawing won't be used as the basis for production. Then a lighter programme may be enough.

What you're drawing Typical type What to check
Plans, diagrams and layouts 2D CAD Layers, dimensioning, symbol library, drawing templates
Products and machine parts 3D design Assemblies, drawings derived from the model, bills of materials
Buildings and structures Building model (BIM) Import and export of IFC, agreements with advisers and project owners
Views for customers Visualisation Whether this is the main task or an optional add-on

File formats: what determines whether others can use the drawing

Programmes support different formats, so always ask the supplier which formats the programme can open and save, and test it with a real drawing from a customer or partner before you decide. Also try what happens when a drawing is opened in another programme: Do dimensions, layers and text stay as they should, or does someone need to fix them afterwards? And think about how long you need to be able to open old drawings. A product can live for years, and the drawing should still be findable and readable when the customer rings.

In the construction industry, there's a shared format. Molio and buildingSMART Denmark write that IFC makes it possible to exchange data across software applications, and they've published a guide to using the format. buildingSMART Denmark's own page explains that the IT Regulations have set the framework for digital deliverables in Danish construction and infrastructure for years. If you're supplying to a project owner, you should ask which formats and requirements apply to that specific project.

What does it cost?

Here are the cost drivers, not prices:

  • The licensing model: subscription or purchased licence, and whether the licence is tied to a named person, a single computer or shared among several.
  • Optional modules, for example for calculation, visualisation or specialist disciplines.
  • Computers that can handle 3D models, if your current ones can't.
  • Implementation: templates, layer names, standard parts and rules for how files are named and versioned.
  • Migration of old drawings and training.
  • Integration with bill-of-materials systems, order management or production management (MES, Manufacturing Execution System).
  • Operations: someone needs to own the standards and libraries.

Should you choose between subscription and purchase, the guide on owning or renting software can suggest some common questions to ask.

Buy a standard system or build your own?

Standard, without question, when it comes to the drawing programme itself. No ordinary company should build its own CAD.

What might make sense to build is the integration layer around it. When a designer finishes an assembly, the bill of materials may need to go to order management or production, and the drawing revision needs to be recorded somewhere so the workshop can see which version applies. This is a classic task for a connector. See what a connector is.

Is the programme cloud-based? Two things to keep in mind. The Danish Data Protection Agency's guide to cloud says that with software as a service (SaaS), the customer has few or no options to customise the product themselves, and it's especially important to be aware if the solution is to be integrated into an environment of existing systems. So ask what the programme can export, and how other systems can fetch data. Next: drawings normally don't contain personal data, but drawing headers, customer names and addresses may do so. If that's the case, the same data processor questions apply as for other cloud services, and you should anyway agree on what the supplier is allowed to use your files for.

Where does an AI layer fit in?

AI typically works on what the programme can export, such as bills of materials, PDF files and drawing data, and not inside the drawing programme itself. Down-to-earth examples:

  • Read a bill of materials and feed the components into order management or a draft quotation.
  • Check drawing headers: Is the drawing number, revision and approver filled in and consistent with your register?
  • Answer "which revision went to the workshop last week?" based on your files and emails.
  • Find old drawings from a description instead of a filename.
  • Fill in a draft quotation based on the drawing's dimensions and components.

What AI can't do: it doesn't replace the designer's judgement and responsibility, and it doesn't make changes to a drawing no one has approved. It's also only as good as the data it has to read. If the bill of materials is wrong, the quotation will be too.

How to tackle this

  1. Write down what you're going to draw, and what the drawings will be used for: production, quotations, handover to the project owner.
  2. Find out who will need to open the files, and in which formats. Gather examples from customers and partners.
  3. Choose two or three candidates, and let a designer try them on a real job.
  4. Ask about licence model, optional modules, computer requirements and what happens to your files if you stop.
  5. Agree rules for filenames, versions and who is allowed to make changes, before the first drawing is saved.
  6. Decide which data needs to come out of the drawing programme and into your other systems, and start with the bill of materials.

If you'd like help choosing or building the integration layer between the drawing programme and your other systems, Agent360 can help. Get in touch at agent360.dk/kontakt.

Sources

  • Molio, buildingSMART Denmark, Publications (IFC guide): https://molio.dk/nyheder-og-viden/netvaerk/buildingsmart-danmark/publikationer (accessed 9 October 2026)
  • Molio, buildingSMART Denmark (IT Regulations): https://molio.dk/nyheder-og-viden/netvaerk/buildingsmart-danmark (accessed 9 October 2026)
  • The Danish Data Protection Agency, Guide to cloud (March 2022): https://www.datatilsynet.dk/Media/637824109172292652/Vejledning%20om%20cloud.pdf (accessed 9 October 2026)

Frequently asked questions

What's the difference between 2D CAD and 3D CAD?

2D CAD is typically used for plans, diagrams and layouts with layers, dimensioning and symbols, whilst 3D design is used for products and machine parts. In 3D, drawings can be derived from the model, so changes to the model flow through to the drawing, and the programme can create bills of materials for the components.

What is the IFC format?

IFC is the shared exchange format in the construction industry, which according to Molio and buildingSMART Denmark makes it possible to exchange data across software applications. If you're supplying to a project owner, you should ask which formats and requirements apply to that specific project.

What does a CAD programme cost?

It depends mainly on the licensing model — subscription or purchased licence — and whether the licence is tied to a named person, a single computer or shared among several. Add optional modules, computers that can handle 3D models, implementation, migration of old drawings, training, integration and operations.

What takes up your time?

Write down the task that takes up the most time. We reply whether it is worth building, and we say so if it is not.