QMS: what is a quality management system, and who needs one?
A QMS is the way a business ensures consistent quality, and the software that keeps track of it. Here is the difference between voluntary ISO 9001 and legal requirements such as KLS, and how to get started.
Table of contents
In short: a QMS (Quality Management System) is the overall way a business makes sure it delivers what the customer ordered, every time: objectives, policies, processes, documentation and follow-up on errors. The most widely used framework is the ISO 9001 standard, which is voluntary, and which you can be certified against. For some industries a quality system is a legal requirement, for example for authorised electrical, plumbing and heating, sewer and gas businesses. QMS software is the tool that keeps track of documents, deviations and improvements.
If you've ended up here, it may be because a customer has asked whether you are ISO 9001 certified, because the same error keeps cropping up, or because the quality folder has outgrown the shared folder on the server. Here you get a down-to-earth explanation of what a QMS is, when it is voluntary and when it is a requirement, and how to get started without drowning in paperwork.
What is a QMS, and what does it do?
A quality management system is a collection of business processes intended to ensure that you consistently meet customer requirements and increase customer satisfaction. It shows up as objectives, policies, processes, documented information and the resources needed to keep it running. The term is used both for the way of working itself and for the software that supports it.
A QMS, and the software that carries it, typically covers:
- Document control: specifications, work instructions, procedures, quality policy and training records gathered in one place, with version control.
- Deviations and corrective actions: often called CAPA (Corrective and Preventive Action). An error is recorded, the cause is found, and the action is followed through.
- Control of defective products: identification and labelling, so they aren't used or shipped out by mistake.
- Internal audit: planning, carrying out and following up.
- Suppliers: selecting and monitoring the ones you buy from.
- Feedback from the shop floor: employees can report problems and suggestions in one place.
- Competence and training: who is trained in what.
- Measurement and management review: ISO 9001 requires that the performance of the processes is measured, analysed and continually improved, and that the results feed into the management review.
ISO 9001 has just come out in a new edition. Dansk Standard (the Danish standards body) wrote in September 2026 that ISO 9001:2026 has been published, with a stronger focus on the role of management in creating a quality culture and ethical behaviour, a clearer structure for risks and opportunities, more room for climate and sustainability, and simplification in several places. As early as October 2025, Dansk Standard wrote that a three-year transition period is expected for certified organisations after publication.
When do you need a QMS?
Signs that the time has come:
- Customers or tenders ask about your quality management, and you answer with a folder nobody has opened in a long time.
- The same error keeps recurring, because nobody owns the follow-up.
- The procedures exist in the heads of a few key people.
- There are several versions of the same work instruction, and nobody knows which one applies.
- You need to apply for or renew an authorisation that requires an approved quality system.
According to Dansk Standard, quality management under ISO 9001 can be used by any organisation, large or small, regardless of field. That doesn't mean a business with five employees needs heavy software. But it does mean the principles fit, even when you're small. A separate QMS system may be premature if you are so few that everyone knows all the procedures, and you have no customers or authorities asking for the documentation. Then a simple, properly maintained set of documents is enough.
Voluntary or a requirement?
| Framework | Who | Voluntary or requirement | What it involves |
|---|---|---|---|
| ISO 9001 | All types of organisation, large and small | Voluntary. Independent certification bodies can confirm that you meet the requirements | Requirements for establishing, implementing, maintaining and continually improving quality management |
| KLS (quality management system) | Businesses with an authorisation in electrical, plumbing and heating, sewer, gas or asbestos demolition work | Requirement for obtaining and keeping the authorisation | Pre-approved by an approved inspection body, final approval by audit within the first year, then approval every two years |
| ISO 13485 | Manufacturers of medical devices | Voluntary standard. Harmonised with EU Regulation 2017/745 on medical devices | A quality system aimed at product safety and performance |
For KLS the consequence is clear: the Danish Business Authority (Erhvervsstyrelsen, of which the Danish Safety Technology Authority is a part from January 2026) writes that without a pre-approval you cannot get an authorisation, and without a valid KLS you risk losing it. ISO 9001 is also built on the same basic structure as, for example, ISO 14001, ISO 27001 and ISO 45001, so they can be combined into one shared management system.
What does it cost?
The biggest item is rarely the software. It is the time it takes to describe how you actually work. Ask about these drivers:
- Licence: is it charged per user? Is there a difference between those who edit and those who only read procedures?
- Set-up: writing processes, responsibilities and templates. That is management and employee time, whatever the system.
- Moving documents from drives, folders and paper.
- Integration: deviations from production or the ERP, and training records from the HR system, so nothing is keyed in twice.
- Training of the people who will use the system every day.
- External audit: a certification body for ISO 9001, an inspection body for KLS.
- Maintenance: procedures have to be reviewed regularly, otherwise the system goes out of date.
Buy an off-the-shelf system or build your own?
Many smaller businesses start with documents in a shared folder and a few standard forms, and that can work for a long time. An off-the-shelf QMS makes sense when you need version control with a trail of who approved what, a fixed routine for deviations and corrective actions, several locations, or a certification that has to be maintained. Building the whole system yourself rarely makes sense, because the functions are well known and standardised.
What can make sense to build is the connections. Quality software can be linked to the production system, and that is often where the gain lies: when a deviation in production or a customer complaint in the inbox automatically becomes a case in the quality system. Read more about the production side in MES: what is production management? and about linking workflows together in workflow-automation.
Where does an AI layer fit in?
A quality system lives on someone reading, assessing and writing. This is where an AI layer can take some of the heavy lifting:
- Sort: read customer complaints from email and suggest category, severity and who is responsible.
- Fill in: write a first draft of a deviation report from the operator's notes, which the quality manager corrects and approves.
- Answer: answer employees' questions ("how do we calibrate the measuring equipment?") from your own procedures, with a reference to the current document.
- Remind: keep an eye on procedures due for review and remind the owner.
- Summarise: pull together deviations, complaints and audit findings for the management review.
What AI can't do: take responsibility, approve its own suggestions or replace an audit. The new ISO 9001 puts exactly that emphasis on top management leading from the front. Dansk Standard wrote in 2025 that the draft of the new edition mentions artificial intelligence in an annex as an area where organisations should assess both opportunities and risks. If you use AI in your quality work, it therefore belongs in your own risk assessment.
How to approach it
- Find the reason. Is it a customer requirement, an authorisation, recurring errors or a wish for certification?
- Describe the few processes that matter most to the customer, before you think about software.
- Gather the documents in one place, with one current version and an owner for each document.
- Introduce a fixed routine for deviations: record, find the cause, act, follow up.
- Choose a tool once you know your needs, and ask about integration with the systems you have.
- Measure and review regularly at management level, and adjust the system.
Agent360 can help you choose a tool or build the integration layer that gets deviations and complaints into the quality system without double keying, so get in touch if you'd like to talk it through.
Sources
- Wikipedia, Quality management system: https://en.wikipedia.org/wiki/Quality_management_system (accessed 6 October 2026)
- Wikipedia, ISO 9000 family: https://en.wikipedia.org/wiki/ISO_9000_family (accessed 6 October 2026)
- Dansk Standard, ISO 9001 quality management: https://www.ds.dk/da/om-standarder/ledelsesstandarder/iso-9001-kvalitetsledelse (accessed 6 October 2026)
- Dansk Standard, The world's most widely used standard for quality management has come out in a new edition: https://www.ds.dk/da/nyhedsarkiv/2026/09/verdens-mest-anvendte-standard-for-kvalitetsledelse-er-kommet-i-en-ny-udgave (accessed 6 October 2026)
- Dansk Standard, Stay ahead of the changes in ISO 9001:2026: https://www.ds.dk/da/nyhedsarkiv/2025/10/vaer-paa-forkant-med-aendringerne-i-iso-9001-2026 (accessed 6 October 2026)
- Danish Safety Technology Authority/Danish Business Authority (Sikkerhedsstyrelsen/Erhvervsstyrelsen), Requirement for a quality management system (KLS): https://www.sik.dk/erhverv/ansoeg-og-registrer/vejledninger/el-gas-vvs-kloak-og-asbestautorisationer/krav-om-kvalitetsledelsessystem-kls-el-vvs-kloak-gas-eller-nedrivning-asbest (accessed 6 October 2026)
Frequently asked questions
Is ISO 9001 a requirement?
No, ISO 9001 is voluntary, but you can be certified against it by an independent certification body. According to Dansk Standard, the standard can be used by any organisation, large or small, regardless of field. For some industries, for example authorised electrical, plumbing and heating, sewer and gas businesses, a quality system is nevertheless a legal requirement.
What is a KLS for authorised businesses?
KLS is the quality management system that businesses with an authorisation in electrical, plumbing and heating, sewer, gas or asbestos demolition work must have in order to obtain and keep the authorisation. It is pre-approved by an approved inspection body, given final approval by audit within the first year, and then every two years. Without a valid KLS you risk losing the authorisation.
What is new in ISO 9001:2026?
According to Dansk Standard, the new edition has a stronger focus on the role of management in creating a quality culture and ethical behaviour, a clearer structure for risks and opportunities, and more room for climate and sustainability. A three-year transition period is expected for certified organisations.
#QMS #quality #ISO 9001 #KLS #production
Contents
What takes up your time?
Write down the task that takes up the most time. We reply whether it is worth building, and we say so if it is not.
Write what takes up your timeRelated articles

MFA: multi-factor authentication for your business – how to get started
Learn how to implement MFA securely in your organisation. Guidance on methods, costs and best practices for protecting company data.

English-language invoices: requirements for invoices to foreign customers
Invoice in English to foreign customers legally. Danish regulations, EU and international VAT rules, zero-rating, reverse charge, and automation.

Drawing programme (CAD): 2D, 3D, licences and file formats
What is CAD? Learn about 2D and 3D design programmes, file formats, licensing models, and how to choose the right tool for technical drawings.